I imagine the top bits will be easier to clean, but more prone to get dirty. While the bottoms parts will be more problematic, but they won't get as dirty.
On the contrary, rain will wash down the upper parts a lot better but maybe not so much in the lower portion below the bend. So it could go either way.
 
On the contrary, rain will wash down the upper parts a lot better but maybe not so much in the lower portion below the bend. So it could go either way.
...well, that's not really contrary though.
 
My point was, the lower bits will be more prone to get dirty in the long run, compared to upper parts.
Not to beleaguer this quibble further, but you did claim, "...it could go either way". Something I am willing to accept, as you and I are unlikely the final authority on the matter...and I did post my part in the spirit of a guesstimation, for what that's worth. But either way, I take that as not being on the contrary where an all or nothing scenario has not really been established here.

...and that's all I'll say to that. Thnkx!
 
June 17, 2022:

IMG_5161.jpeg
IMG_5162.jpeg
IMG_5163.jpeg
IMG_5179.jpeg
IMG_5180.jpeg
IMG_5181.jpeg
IMG_5182.jpeg
IMG_5183.jpeg
IMG_5184.jpeg
IMG_5185.jpeg
IMG_5186.jpeg
IMG_5187.jpeg
IMG_5188.jpeg
IMG_5189.jpeg
IMG_5190.jpeg
 
Last edited:

Back
Top