sikandar
Active Member
April 20
got it right
Active Member
It's just you.....It is jammed against the tracks on one side and the expressway on the other....how much bigger would you like it to be?
torman404
New Member
Just creeping into my view.
PMT
Senior Member
Friday:
Michael62
Active Member
Ecco le foto del Venerdì Santo oggi!
Westside story: They poured concrete into the core on Thursday so we may get a lift early this week coming. They also poured two more floors of concrete which caused them to lift up the curtains.
You may also notice 3 blue cylindrical posts/tubes at ground level in the southwest corner. These will eventually be attached to the outside steel frame as crane supports are removed from the core. They have already replaced the support beams on crane#1 which is out of my view. They've been having problems with the steel beam that will be the attachment point, welders have been working on it all week. You can see this beam adjacent to where the old supports that were removed two weeks ago and by the raised curtains next to the crane#2
Eastside Story: They've been clearing the concrete between the core and crane#3 and crane#4. Some new steelwork may happen this week to begin enclosing the maintenance floor, on level 3
A closer look in the northeastern section shows progress on formwork to complete level 3 floor. and progress on the eastern wall
Westside story: They poured concrete into the core on Thursday so we may get a lift early this week coming. They also poured two more floors of concrete which caused them to lift up the curtains.
You may also notice 3 blue cylindrical posts/tubes at ground level in the southwest corner. These will eventually be attached to the outside steel frame as crane supports are removed from the core. They have already replaced the support beams on crane#1 which is out of my view. They've been having problems with the steel beam that will be the attachment point, welders have been working on it all week. You can see this beam adjacent to where the old supports that were removed two weeks ago and by the raised curtains next to the crane#2
Eastside Story: They've been clearing the concrete between the core and crane#3 and crane#4. Some new steelwork may happen this week to begin enclosing the maintenance floor, on level 3
A closer look in the northeastern section shows progress on formwork to complete level 3 floor. and progress on the eastern wall
Automation Gallery
Superstar
Go stand on Bay across the street from it and you'll see how massive it actually is.
DSC
Superstar
Yes, you can see the 'slots' for it on the 'blast wall' in some of the shots further back in this thread.
GabrielHurl
Active Member
Jump Jump Jump
Michael62
Active Member
? Parachute Club Time ?
Support Bracket Fixed and Installed ready for the supports to be attached to Crane#2
New Steel Beam assembly for level #3. I guess we're done with concrete forming on the eastern part of the building now
Support Bracket Fixed and Installed ready for the supports to be attached to Crane#2
New Steel Beam assembly for level #3. I guess we're done with concrete forming on the eastern part of the building now
got it right
Active Member
Might as well jump.....jump.....go ahead and jump
Michael62
Active Member
Level #3 steel assembly
A closer look
A closer look
Michael62
Active Member
Screenshots of some floorplans to help reference continuing progress
Level 03 Mechanical Level
Level 04 Office/Amenity Plan
Cross Section View (standing on Lakeshore Dr looking north, Bay St on the left 18 Yonge St on the right)
Level 03 Mechanical Level
Level 04 Office/Amenity Plan
Cross Section View (standing on Lakeshore Dr looking north, Bay St on the left 18 Yonge St on the right)
Last edited:
Toron
Active Member
drum118
Superstar
April 22
