Towered
Superstar
Pillars of creation.
- Thread starter urbandreamer
- Start date
khaldoon
Active Member
If you flip the piece 90 degrees clockwise, you can see that it would fit nicely at the top of diagonal pillars+yellow support tripod pictured on the left.
AlvinofDiaspar
Moderator
Yup, see below for illustration - flip the node over - the asterisks connects, the plane in the first pic (formed by the extended plates with the boltholes) represents the upper floor - note: not saying this node will go to this specific connection.
(pics by @Benito)
AoD
Last edited:
Lachlan Holmes
Active Member
jozl
Active Member
It never dawned on me that while above grade construction was suspended due to permit issues the super columns were being assembled off site all along. What a pleasant surprise. This is awesome.
macro
Active Member
Does anyone know where?
someMidTowner
¯\_(ツ)_/¯
The structural steel supplier is Walters Group. They have a few plants but my guess is that these are being fabricated at their Stoney Creek facility
The One Tower - Walters Group Inc.
Canada's tallest building, the One, is an 85-storey tower. There are eight mega-columns with diagonal bracing on the façades.
www.waltersgroupinc.com
macro
Active Member
what are the odds. I’m based in Winona. I could take a swing by there tomorrow to see if any future pieces are on site.The structural steel supplier is Walters Group. They have a few plants but my guess is that these are being fabricated at their Stoney Creek facility
The One Tower - Walters Group Inc.
Canada's tallest building, the One, is an 85-storey tower. There are eight mega-columns with diagonal bracing on the façades.
thaivic
Active Member
3Dementia
Senior Member
Pretty sure my brother-in-law Casey has a management job at Walters in Stoney Creek (unless he just retired), and he knows full well what a skyscraper geek I am... the bugger!
Suffice to say I am following up with him.
fanoftoronto
Active Member
So one thing I find interesting is that there are no horizontal attachment points for the first hanger exoskeleton. I wonder how they transfer loads from the hanger to the super-column.
AlvinofDiaspar
Moderator
I think you are assuming that it will be connecting to the first section of the megacolumns - I think it is higher in the second section because the node itself will add some additional height (that's also where you have a plate sticking out). Another giveaway is that the two diagonal columns are touching at the (false) ceiling - but not as they are installed right now. Also I am not sure how much loads they will need to transfer at this level given it's already supported...
It will be interesting to see how the structure evolves.
AoD
Last edited:
UtakataNoAnnex
Senior Member
I think it helps to note this asterisk of iron goodness, are in fact are likely two objects that will join up with those diagonal support columns per corner in the eventual. They are together like that as picted likely for ease of transport...being awkward shapes and all. If they ain't that, I'll eat a pigtail!
AlvinofDiaspar
Moderator
Another interesting (logical) thing - the outward appearance of the supercolumns doesn't change - but it will actually get thinner (less depth on the side facing the building) as you go up.
AoD
AoD
macro
Active Member
Look what I found!
